Golden Lighting 3071-BA1 GG User Manual
Parts & assembly sheet, Parts list
Mounting strap
Mounting Screw
Mounting screw
1ea 102X320mm
2ea 8/32"X5/8''mm
2ea 8/32X1"
Wire connnector
Green Ground
screw
3ea P3 Orange
1ea 8/32"X10mm
Part Needed
Decorative Chains
Quantity
Part Needed
Quantity
Reason why
( missing, scratched, broken glass, bent, bad finish)
Comments
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts.
PARTS & ASSEMBLY SHEET
Fixture Name:ATHENA 3071- BA1 GG
This fixture assembled PO:__________ Date: ________
PARTS LIST
Company Name:_______________________Co. Account #:_____________
below to be filled out by retailer
For Customer Service, contact the place of purchase to arrange for replacement parts.
F
IXTURE
A
SSEMBLY
I
NSTRUCTIONS
Read and review installation instruction sheet before
assembling the fixture.
3071-BA1 GG
1. Hang Decorative Chains (I) onto Fixture Body (J).
2. Slide Glass Shade (H) over Socket (E) and secure in place
using Metal Spacer Ring (F) and Socket Ring (G). Screw on
Socket Ring (G) until tight.
3. Install the light bulb in accordance with the fixture's
specification. Bulb note:
Use a tissue or paper towel to hold the bulb and push down
into the socket. Oils or dirt can cause the bulb life to shorten.
Rubbing alcohol is recommended to clean the bulbs if dirty.
(DO NOT EXCEED THE MAXIMUM WATTAGE RATING!)
NOTE: I
NSTALL THE GLASS ASSEMBLY AFTER
THE FIXTURE IS HUNG.
H
G
F
E
I
J