Golden Lighting 3086-M1L CH - Manual

Canopy Wire Connectors Top Loop
1ea 5"W× 3/4"H 3ea A4 Orange 1ea D50mm×H60mm
Chain Junction Box Screw Spring Washer
1ea 6ft x3.8mm 2ea 8/32" x 1" 1ea @15 x 2mm
Chain
Connector
Nipple
2ea @4.X50mm 1ea @3/8 x 40mm x 5mm 1ea @1/2 x 55mm
Mounting Strap
w/ ground screw
Hex Nut
1ea 3/4"X4" 2ea @1/2 x 4mm
Decorative
chains
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
PARTS & ASSEMBLY SHEET
Fixture Name: HARLAND 3086-M1L CH
This fixture assembled PO:__________ Date: ________
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts.
to be filled out by retailer
PARTS LIST
Canopy Loop
with Collar
F IXTURE A SSEMBLY I NSTRUCTIONS
Read and review installation instruction sheet before
assembling the fixture.
3086-M1L CH
Company Name:_______________________Co. Account #:_____________
Fig. 1
For Customer Service, contact the place of purchase to arrange for replacement parts.
1. Place Nut (M) over the threaded nipple
screw with the Top Loop (J) until tight.
2. Place the Glass (P) over the Wood Ring (Q). 3.
Attach Ropes (O) to the Wood Ring (Q) and hook into
the holes in the metal Check Ring (N).
J
M
N
Q
O
P