Golden Lighting 3711-SF CB - Manual

1ea ∅6-1/2"*H1-1/2" 2ea 8#32-IP*1" 1ea 1/8-IP*H60mm
1ea 6ft ∅3.8 3ea P3 Orange 1ea 1/4-IP*H60mm
2ea ∅5.8*H61mm 1ea ∅1-1/8"*H42mm 1ea W4-1/8"*E1"*H5mm
1ea 1/8-IP*H145mm 2ea 1-1/2-IP*H2mm 2ea 1-1/2-IP*H2mm
1ea ∅2-1/4"*H36mm 1ea 1/8-IP*H4mm
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
ASSEMBLING THE FIXTURE as Semi flush (Fig. 1)
NOTE: Assemble on a cushioned surface to prevent damage to
glass finish.
1. Thread the threaded rod/nipple (N) onto the socket assembly
coupler, secure with a hex nut.
2. Install the light bulbs in accordance with the fixture's
specifications.
3. Thread on the Nipple (N) in this order:hex nut, metal washer
(O), plastic washer (P), glass shade (S) thread the nipple through
the hole in bottom of glass shade, plastic washer (X), metal
washer (Y), hex nut (T) ,bottom cap (V) and secure in place with
the Finial (Z).
(DO NOT EXCEED MAXIMUM WATTAGE RATING)
Fig 1
For Customer Service, contact the place of purchase to arrange for replacement parts.
Canopy Mounting Screws Top loop
Chain Wire connectors Nipple
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note onthis sheet and contact the place of purchase to arrange for replacement parts.
PARTS LIST Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
PARTS & ASSEMBLY SHEET
Fixture Name: Rockefeller 2488-SF FI & 3711-SF CB
This fixture assembled PO:__________ Date: ________
Nipple
Metal washer Plastic washer
Chain connector
Canopy loop
with Collar
Mounting strap
Finial
Read and review installation instruction sheet before
assembling the fixture.
1ea 1/8-27-IP*H32mm
Hex Nut Bottom cap
F IXTURE A SSEMBLY I NSTRUCTIONS
2488-SF FI & 3711-SF CB
24883711-PartsInstallation_20110105m.xls