Golden Lighting 6005-M1L RBZ - Manual

6005-M1LPartsInstallation_111004m.xls Page 1
Mounting strap
(circular)
Wire connectors Deco nut
1ea 4" x 3" 2ea P3 Orange 2ea 9 x 9.5mm
Canopy
Junction box
screw
Canopy loop (I)
1ea 6"dia x 7/8"E 2ea 8/32" x 1" 1ea 3/8 x 66mm x 5mm
Chain Mounting screw
2ea 6ft x 3.8mm 2ea 8/32" x 1" 1ea 3/8 x 66mm x 5mm
Chain connector Hex nut Nipple
2ea 4 X 55mm 3ea 5/32 x 3.5mm 1ea 3/8 x 15mm
Spring washer Rod Rod
15 x 3mm 3ea 1/2" x 12" 1ea 1/2" x 6"
Socket Ring
(AB only)
Socket Ring
(PW, RBZ only)
Green Ground
screw
1ea 51 x 23mm 1ea 50 x 9mm 1ea 8/32" X 10mm
Part Needed Quantity
Part Needed Quantity
Reason why (missing, scratched, broken glass, bent, bad finish)
Comments
This fixture assembled PO:__________ Date: ________
to be filled out by retailer
For Customer Service, contact the place of purchase to arrange for replacement parts.
ASSEMBLING THE FIXTURE (Fig.1)
1. By measuring, determine correct number of rods
and chain needed for proper hanging height. There
are 2 ft of chain and 2 optional 12" rods included.
2. To shorten the fixture, slide the excess 12" rods off
the wire.
3. To lengthen the fixture thread the additional rods
onto the wire or substitute longer chain for the 2 ft
length of included chain.
Fig. 1
NOTE: INSTALL THE GLASS ASSEMBLY AFTER THE
FIXTURE IS HUNG.
Company Name:_______________________Co. Account #:_____________
PARTS & ASSEMBLY SHEET
6005-M1L
Read and review installation instruction sheet before
assembling the fixture.
F IXTURE A SSEMBLY I NSTRUCTIONS
Fixture Name: Lancaster 6005-M1L PW/RBZ/AB
Top loop (L)
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts.
PARTS LIST
These two rods may be
removed
or
additional rods and/or chain
may be added.
ROD-6005 PW/RBZ/AB *
CHAIN-PW/RBZ/AB *
*available for purchase
separately
D
F
H
G
I
J
K
L
M
N
N
O
P