Golden Lighting 6005-SF RBZ - Manual (Page 3)

Fig. 3
For Customer Service, contact the place of purchase to arrange for replacement parts.
WARNING ! SHUT OFF POWER AT FUSE OR CIRCUIT BREAKER.
HANGING THE FIXTURE as Semi-flush (Fig. 1)
1. Carefully remove the new fixture from the carton and the yellow bag
that holds all your parts. Check that all parts are included as shown in
the illustration and parts list.
2. Shut off power at the circuit breaker and remove the old fixture from
ceiling, including the old mounting strap.
3. The Circular Strap (B) contains several pairs of threaded holes.
Find the pair of holes that matches the hole spacing in your fixture
Canopy (F). Thread the two Mounting Screws (A) halfway into the
Mounting Strap (B) facing down. Secure in place with hex nuts. These
will have their threaded ends protrude through the two holes in the
fixture canopy (F).
4. Place the Mounting Strap (B) over the junction box.
5. Attach the Mounting Strap (B) to the junction box using the two
Mounting Screws (C). Tighten the screws (C) securely with
screwdriver.
Fig. 1
CONNECTING THE WIRES (Fig. 2)
6. Attach the power supply wires to the fixture lead wires by connecting
BLACK to BLACK (or SMOOTH) and WHITE to WHITE (or RIBBED).
NOTE: Twist the wires together in the same direction you twist the wire
connector onto the wires.
7. Attach the GROUND wire (GREEN or COPPER) from the junction
box and the fixture ground wire to the green ground screw on the
Mounting Bracket (B). Or, connect both wires together using a wire
connector.
8. Tuck these wire connections neatly into the junction box.
Fig. 2
INSTALLATION INSTRUCTIONS
Fixture Name: Lancaster 6005-SF PW/RBZ/AB
For Semi-Flush / Convertible Light Fixture
FINISHING THE INSALLATION (Fig. 3)
9. Place the fixture’s Canopy (F) over the Mounting Strap (B) and over
the Mounting Screws (A). Adjust the fixture canopy until the Mounting
Screws (A) protrude out from the canopy. Secure the fixture against
the ceiling by threading the Decorative Nuts (E) on until tight.
10. Install the light bulbs and glass shade according to the fixture
assembly sheet.
YOUR INSTALLATION IS NOW COMPLETE. RETURN POWER TO
THE JUNCTION BOX AND TEST THE FIXTURE.
L
B
C
A
JUNCTION BOX
(CEILING)
D
E
F
H
J
CHAIN
G
BARE COPPER
(Ground)
GREEN
(Ground)
FIXTURE WIRES
SMOOTH (BLACK)
RIBBED (WHITE)
BLACK
WHITE
HOUSE WIRES
C
JUNCTION BOX
(CEILING)
B
A
E
D
BARE COPPER
(Ground)
GREEN
(Ground)
FIXTURE WIRES
SMOOTH (BLACK)
RIBBED (WHITE)
BLACK
WHITE
HOUSE WIRES
B
E
F
G
H
I
J
K
L