Golden Lighting 6262-5 DNI - Manual

1ea ∅5-1/2"*H1-1/4" 2ea 8#32-IP*1" 1ea 1/8-IP*H60mm
1ea 6ft ∅3.8 3ea P3 Orange 1ea 1/4-IP*H60mm
2ea ∅5.8*H61mm 1ea ∅1-1/8"*H42mm 1ea W4-1/8"*E1"*H5mm
1ea 1/8-IP*H440mm 1ea 1/8-IP*H4mm 1ea ∅3-1/4"*H26mm
1ea ∅2"*H5mm 1ea ∅2"*H438mm
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
Nipple
Nipple
Chain connector
Canopy loop
with Collar
Mounting strap
Hex Nut Top cap
Canopy Mounting Screws Top loop
Chain Wire connectors
PARTS & ASSEMBLY SHEET
Fixture Name: Hampden 6262-5 DNI
This fixture assembled PO:__________ Date: ________
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note onthis sheet and contact the place of purchase to arrange for replacement parts.
PARTS LIST
Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
F IXTURE A SSEMBLY I NSTRUCTIONS
Read and review installation instruction sheet before
assembling the fixture.
6262-5 DNI
Center column Cover
ASSEMBLING THE FIXTURE (Fig.1)
1. Gently spread the arms until evenly spaced if arms are
packed closed
2. Thread the Nipple (V) into Hickey （R), then tighten.
3. Slide the Center column (T) over the long Nipple (V) and
top with the Cover (S) and Top cap (M), tighten securely to
the Nipple using the washer (W) and the Hex Nut (U).
Fig 1
NOTE: I NSTALL THE GLASS ASSEMBLY AFTER
THE FIXTURE IS HUNG.
For Customer Service, contact the place of purchase to arrange for replacement parts.
6262-PartsInstallation_101110m.xls