Golden Lighting 6262-BA1 DNI - Manual

6262-BAPartsInstallation_20120313Rev.xls
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
2ea 5/32-IP*H3mm
Mounting Strap Mounting Screws Deco Nut
Wire connectors Mounting Screws Hex Nut
1ea ∅4"*H2mm 2ea 8#32-IP*1" 2ea 5/32-IP*H10mm
For Customer Service, contact the place of purchase to arrange for replacement parts.
F IXTURE A SSEMBLY I NSTRUCTIONS
Read and review installation instruction sheet,
but do not install before assembling the fixture.
6262-BA1 DNI
1. Slide the Glass Shade (J) over Socket ( I)
and secure Glass Shade (J) by threading the
Socket Ring (O) to Socket (I) until tight.
2. Install the light bulb in accordance with the
fixture's specifications.
(DO NOT EXCEED MAXIMUM WATTAGE RATING!)
Fig 1
NOTE: I NSTALL THE GLASS ASSEMBLY
AFTER THE FIXTURE IS HUNG.
3ea P3 Orange 2ea 5/32-IP*1-3/4"
PARTS & ASSEMBLY SHEET
Fixture Name: Hampden 6262-BA1 DNI
This fixture assembled PO:__________ Date: ________
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts
are missing or damaged, please note onthis sheet and contact the place of purchase to arrange for
replacement parts.
PARTS LIST Company Name:_______________________Co. Account #:_____________
to be filled out by retailer