Golden Lighting 7116-WSC LC User Manual
Parts & assembly sheet, Parts list
Part Needed
Quantity
Part Needed
Quantity
Reason why
( missing, scratched, broken glass, bent, bad finish)
Comments
Deco Screw
Rubber Washer
2ea 5/32-IP*9MM
2ea ∅14mm
Wire connectors
Nipple
Hex Nut
1ea 4-1/8-IP*H2mm
2ea 8#32-IP*1"
1ea 1/8-27-IP*H15mm
For Customer Service, contact the place of purchase to arrange for replacement parts.
F
IXTURE
A
SSEMBLY
I
NSTRUCTIONS
Read and review installation instruction sheet, but do
not install before assembling the fixture.
7116-WSC LC
1. Thread on the nipple (17) in this order: hex nut, metal
washer (18), plastic washer (19), glass shade (16) thread
the nipple through the hole in bottom of glass shade,
plastic washer, metal washer, hexnut (20) , bottom cap
(21) and secure in place with the Finial (22).
2. Install the light bulb in accordance with the fixture's
specifications.
(DO NOT EXCEED MAXIMUM WATTAGE RATING
Fig 1
3. Unscrew the Deco screws (24) and Rubber washers (23) from fixture backplate.
*Place the scroll arm (25) against the side of Glass shade (16) with the small rubber washer between the arm and
glass.
*Insert the Deco screw (24) through the hole, hold glass up to the installed backplate(15) and secure by threading the
Deco screw (24) into the side of backplate.
*Continue to hold glass and repeat with the other side.
NOTE: I
NSTALL THE GLASS ASSEMBLY AFTER THE FIXTURE IS HUNG.
3ea P3 Orange
1ea 1/8-27-IP*1-3/4"
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing
or damaged, please note onthis sheet and contact the place of purchase to arrange for replacement parts.
PARTS LIST
Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
3ea 1/8-27-IP*H3mm
Mounting Strap
Mounting Screws
Metal Cap Nut
PARTS & ASSEMBLY SHEET
Fixture Name: Mayfair 7116-WSC LC
This fixture assembled PO:__________ Date: ________
1ea 1/8-27-IP*2-1/8"
*may have washers, hex nuts attached
Nipple (17)
Finial
1ea 1/8-27-IP*H30mm
Bottom Cap
1ea ∅3-1/4"*H1-3/4"
7116-PartsInstallation_20110106m.xls