Golden Lighting 7644-6 GA - Manual

7644-6 GA PartsInstallation_20120406m(ok) (2)
Canopy Wire Connectors Top Loop
1ea @5-5/8"X1-5/8" 3ea P4 Orange 1ea @3/8 x 50mm
Chain
Junction Box
Screw
Spring Washer
1ea 6ft x3.8mm 2ea 8/32" x 1" 1ea @15 x 2mm
Chain Connector Nipple
2ea @3X38mm 1ea @3/8 x 40mm x 5mm 1ea @3/8 x 65mm
Mounting Strap w/
ground screw
Hex Nut
1ea 3/4"X4" 2ea @3/8 x 3mm 6 pcs
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
ASSEMBLING THE FIXTURE (Fig. 1)
1. Feed the fixture wires through the Top loop (J) and pull the
wires until taut.
2. Then screw the Top Loop (J) to the threaded center
column of Frame (M) until tight.
3. Gently spread the arms until evenly spaced if arms are
packed closed.
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note onthis sheet and contact the place of purchase to arrange for replacement parts.
PARTS LIST
Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
Decorative Chain
(CRYSET-7644-6)
For Customer Service, contact the place of purchase to arrange for replacement parts.
PARTS & ASSEMBLY SHEET
7644-6 GA
Read and review installation instruction sheet before
assembling the fixture.
F IXTURE A SSEMBLY I NSTRUCTIONS
This fixture assembled PO:__________ Date: ________
Fixture Name: Mirabella 7644-6 GA
Canopy Loop
with Collar
Fig. 1
NOTE: INSTALL THE SHADE ASSEMBLY AFTER THE
FIXTURE IS HUNG.
Bulb
(Not Provided)
M