Golden Lighting 7644-SF GA - Manual

7644-SF GA PartsInstallation_20120406m(ok)
Mounting strap
(circular)
Wire connectors Deco nut
1ea @4" 3ea P4 Orange 5ea 10x 9.5mm
Canopy
Junction box
screw
Top loop
1ea @5-5/8"X1-5/8" 2ea 8/32" x 1" 1ea @3/8 x 50mm
Chain Mounting screw
1ea 6ft x3.8mm 2ea 8/32" x 1-1/4" 1ea @3/8 x 40mm x 5mm
Chain connector Hex nut Nipple
2ea @3X38mm 2ea @3/8 x 3mm 1ea @3/8 x 65mm
Mounting strap
w/ ground screw
Screw
1ea 3/4"X4" 2ea @8/32" x 8mm 3 pcs
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
This fixture assembled PO:__________ Date: ________
to be filled out by retailer
For Customer Service, contact the place of purchase to arrange for replacement parts.
ASSEMBLING THE FIXTURE as Semi flush (Fig. 1)
1. Place shade (N) over the nipple of the Frame (M) and
secure with Deco Nut (E).
2. Attach hooks at both ends of the Decorative Chain (O)
to Frame (M) as shown in the diagram.
3. Install the light bulbs in accordance with the fixture's
specifications.
(DO NOT EXCEED MAXIMUM WATTAGE RATING)
Company Name:_______________________Co. Account #:_____________
Fig. 1
PARTS & ASSEMBLY SHEET
7644-SF GA
Read and review installation instruction sheet before
assembling the fixture.
F IXTURE A SSEMBLY I NSTRUCTIONS
Fixture Name: Mirabella 7644-SF GA
Canopy loop
with Collar
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note onthis sheet and contact the place of purchase to arrange for replacement parts.
PARTS LIST
Decorative Chain
(CRYSET-7644-SF)
b
b
a a
M
N
E
O
Q