Golden Lighting 8106-363/15L CDB - Manual

Canopy
Screw collar
loop
Small screws
1ea 153mm * 32mm 1ea 25mm * 45mm 2ea 8/32T * 1-1/4"L
Chain Hvy Threaded ring Wire lock
1ea 12ft 1ea 30mm * 4mm 1ea 8mm * 16hmm
Chain connector Nipple Mounting strap
2ea 23.8 * 59mm 1ea 12mm * 55mm 1ea 100mm * 20mm
Wire connectors
1/2" Nipple /
Threaded rod
3ea Orange 1ea 12mm * 250mm
Fender washer Hex Nut
Mounting
screws
2ea 8/32T *8L 7ea 19mm * 4mm 2ea 8/32T * 1-1/4"L
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
PARTS & ASSEMBLY SHEET
This fixture assembled PO:__________ Date: ________
Fixture Name: Torbellino 8106-363/15L CDB
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are
missing or damaged, please note onthis sheet and contact the place of purchase to arrange for replacement
parts.
PARTS LIST Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
F IXTURE A SSEMBLY I NSTRUCTIONS
For Customer Service, contact the place of purchase to arrange for replacement parts.
NOTE: I NSTALL THE GLASS ASSEMBLY AFTER
THE FIXTURE IS HUNG.
1. Feed the fixture wires through the Top loop (J) and
pull the wires until taut.
2.Then screw the Top Loop (J) to the top of Frame (K)
until tight.
8106-363/ 15L CDB
Read and review installation instruction sheet before
assembling the fixture.
Fig 1
K
CHAIN
J
H