Golden Lighting 8106-6 CDB - Manual

Canopy Hex Nut
Canopy loop
and Canopy
loop collar
1ea Φ153*32Hmm 1ea Φ19mm*4mm 1ea Φ25*45Hmm
Chain Threaded rod Wire connectors
1ea 6ft 1ea Φ12*55mm 3ea Orange
Chain
connector
Mounting Strap
Mounting
Screws
2ea 23.8*59mm 1ea 100mm*20mm , 1ea Φ9*10mm 2ea 8/32T*1-1/4"L
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
PARTS & ASSEMBLY SHEET
This fixture assembled PO:__________ Date: ________
Fixture Name: Torbellino 8106-6 CDB
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are
missing or damaged, please note onthis sheet and contact the place of purchase to arrange for
replacement parts.
PARTS LIST Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
F IXTURE A SSEMBLY I NSTRUCTIONS
For Customer Service, contact the place of purchase to arrange for replacement parts.
NOTE: I NSTALL THE GLASS ASSEMBLY
AFTER THE FIXTURE IS HUNG.
1. Feed the fixture wires through the Top loop (J)
and pull the wires until taut.
2.Then screw the Top Loop (J) to the top of Frame
(K) until tight.
8106-6 CDB
Read and review installation instruction sheet before
assembling the fixture.
Fig 1
K
CHAIN
J
H