Golden Lighting 8106-BA1 CDB - Manual

Circular strap
Mounting
screws Wire
connencors
1ea Φ102*1.5tmm 4ea 8/32T*1-1/4"L 3ea Orange
Hex nut Deco nut Green screw
2ea Φ9*3.5tmm 2ea Φ12*10hmm 1ea Φ9*10mm
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any
parts are missing or damaged, please note onthis sheet and contact the place of purchase to
arrange for replacement parts.
PARTS LIST
Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
PARTS & ASSEMBLY SHEET
This fixture assembled PO:__________ Date: ________
Fixture Name: Torbellino 8106-BA1 CDB
F IXTURE A SSEMBLY I NSTRUCTIONS
For Customer Service, contact the place of purchase to arrange for replacement parts.
NOTE: I NSTALL THE GLASS ASSEMBLY
AFTER THE FIXTURE IS HUNG.
1. Place the Glass Shade (F)over the Socket (G).
2.Holding the Glass Shade (F), place the Socket
Washer (I)over the Threaded Socket (G).
3. Secure Glass Shade (F) and Socket Washer (I)
by threading the Socket Ring (H) onto the Threaded
Socket (G) until tight.
4. Install the light bulb in accordance with the
fixture's specifications.
(DO NOT EXCEED MAXIMUM WATTAGE RATING!)
Fig 1
8106-BA1 CDB
Read and review installation instruction sheet
before assembling the fixture.
D
E
I
F
G
H