Golden Lighting 8106-BA4 CDB - Manual

Circular strap
Mounting
screws Wire
connencors
1ea Φ102*1.5tmm 4ea 8/32T*1-1/4"L 3ea Orange
Hex nut Deco nut Finials
2ea Φ9*3.5tmm 2ea Φ12*10hmm 2ea Φ36*55hmm
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
F IXTURE A SSEMBLY I NSTRUCTIONS
For Customer Service, contact the place of purchase to arrange for replacement parts.
NOTE: I NSTALL THE GLASS ASSEMBLY
AFTER THE FIXTURE IS HUNG.
1. Attach the Finials (I) to each end of the bath bar
(J) by twisting in a clockwise direction.
2. Place the Glass Shade (F)over the Socket (G).
3. Holding the Glass Shade (F), place the Socket
Washer(I)over the Threaded Socket(G).
4. Secure Glass Shade (F) and Socket Washer (I)
by threading the Socket Ring (H) onto the Threaded
Socket (G) until tight.
5. Install the light bulb in accordance with the
fixture's specifications.
(DO NOT EXCEED MAXIMUM WATTAGE RATING!)
Fig 1
8106-BA4 CDB
Read and review installation instruction sheet
before assembling the fixture.
PARTS & ASSEMBLY SHEET
This fixture assembled PO:__________ Date: ________
Fixture Name: Torbellino 8106-BA4 CDB
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any
parts are missing or damaged, please note onthis sheet and contact the place of purchase to
arrange for replacement parts.
PARTS LIST Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
D
E
I
H
F
G
I
J D