Golden Lighting 8118-6 BUS - Manual

1ea D 5-3/4"*H1-1/2" 2ea 8#32-IP*1" 1ea 1/8-IP*H60mm
1ea 6ft 3.8mm 3ea P3 Orange 1ea 1/4-IP*H60mm
2ea 5.8*H61mm 1ea 1-1/8"*H42mm 1ea W4-1/8"*E1"*H5mm
1ea D 1-1/2"*H5mm 1ea D2-1/4"*H42mm 1ea 1-1/2"*H5mm
1ea D1-1/4"*H49mm 1ea 1/8-IP*H55mm 1ea 4"*H473mm
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
F IXTURE A SSEMBLY I NSTRUCTIONS
Finial Nipple
Center column
Chain connector
Canopy loop
with Collar
Mounting strap
Chain
Bottom cap (T) Crystal ball Bottom cap (W)
This fixture assembled PO:__________ Date: ________
PARTS & ASSEMBLY SHEET
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or damaged,
please note on this sheet and contact the place of purchase to arrange for replacement parts.
Fixture Name: Alston Place 8118-6 BUS
PARTS LIST Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
Canopy Mounting Screws Top loop
ASSEMBLING THE FIXTURE (Fig.1)
1. Thread the Center Column (L1) to connector (R) till tight.
2. Feed the fixture wires through the Top loop (J) and pull the
wires until taut.
3. Then screw the Top Loop (J) to the threaded center
column of Frame (M) until tight.
Fig 1
NOTE: I NSTALL THE GLASS ASSEMBLY AFTER
THE FIXTURE IS HUNG.
Read and review installation instruction sheet before
assembling the fixture.
8118-6 BUS
Wire connectors Nipple
For Customer Service, contact the place of purchase to arrange for replacement parts.
8118-6PartsInstallation_10032011m.xls