Golden Lighting 8981-M1L GRM - Manual

Canopy Hex nut Wire connectors
1ea 130*H22mm 1ea 1/2"*H3mm 2ea A3 Orange
Mounting Strap
w/ ground screw
Nipple Chain connector
1ea 100*22*H4mm
/1ea 8/32"*H10mm
1ea 1/2"*H55mm 2ea 5*H58.5mm
Chain Mounting screws
Canopy Loop and
Canopy loop
collar
1ea 3.8mm*L72" 2ea 8/32"*H1" 1ea 1/2"*H46mm
12" Rod
3ea 12.7*H305mm
Crystal draping
A1 x 3pcs
Crystal draping
A2 x 3pcs
Crystal drops
B2 x 3pcs
Crystal drops
C1 x 1pcs
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
Crystal drops are included in parts
bag. (see crystal assembly
instruction)
8981-M1L BRI / GRM
Read and review installation instruction sheet, but do
not install before assembling the fixture.
F IXTURE A SSEMBLY I NSTRUCTIONS
For Customer Service, contact the place of purchase to arrange for replacement parts.
NOTE: THE SHADE ASSEMBLY CAN BE DAMAGED BY
ROUGH HANDLING. USE CARE WHEN ASSEMBLING.
1. By measuring determine correct number of rods and
chain needed for proper hanging height. There are two
optional 12" rods included.
2.To shorten the fixture trim the wires to the desired length
plus at least 8~10 inches. You must use at least one Rod.
3. To lengthen the fixture add additional rods
(ROD-8981 CH) or additional chain (CHAIN-8981),
available separately.
Fig 1
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts.
PARTS LIST
Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
PARTS & ASSEMBLY SHEET
This fixture assembled PO:__________ Date: ________
Fixture Name: Echelon 8981-M1L BRI / GRM
These two Rods may be
removed
or
additional Rods and/or
Chain may be added.