Golden Lighting 9106-BA2 PW User Manual
Parts & assembly sheet, Parts list
9106 PartsInstallation-121208.xls
Circular Mounting
Strap
Mounting screw
Mounting screw
1ea Φ4"*H1.2mm
2ea 8/32-IP*1"
2ea 5/32-IP*1"
Hex nut
Wire connnector
Deco nuts
2ea 5/32-IP*H3mm
3ea A3 Orange
2ea 5/32-IP*H9mm
Part Needed
Quantity
Part Needed
Quantity
Reason why
( missing, scratched, broken glass, bent, bad finish)
Comments
Fig 1
9106-BA2 PW
Read and review installation instruction sheet before
assembling the fixture.
F
IXTURE
A
SSEMBLY
I
NSTRUCTIONS
For Customer Service, contact the place of purchase to arrange for replacement parts.
NOTE: I
NSTALL THE GLASS ASSEMBLY AFTER
THE FIXTURE IS HUNG.
1. Slide the Glass Shade (K) over Socket (G) and secure it by
threading the Socket Ring (I) onto the Threaded Socket (G)
until tight.
2. Install the light bulbs in accordance with the fixture's
specification.
(DO NOT EXCEED THE MAXIMUM WATTAGE RATING!)
PARTS LIST
Company Name:_______________________Co. Account #:_____________
below to be filled out by retailer
Fixture Name: Taylor
9106-BA2 PW
PARTS & ASSEMBLY SHEET
This fixture assembled PO:__________ Date: ________
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts.
G
K
I