Golden Lighting 1425-2W WG User Manual
Parts & assembly sheet, Parts list
2ea ∅4-1/4"*H15mm
Part Needed
Quantity
Part Needed
Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
2ea 8#32-IP*1"
2ea 8#32-IP*H11mm
Wire connectors
Mounting Screws
PARTS LIST
Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
2ea ∅1"*4-3/8"
3ea P3 Orange
2ea 8#32-IP*1-1/2"
2ea 8#32-IP*H3mm
Mounting Screws
Deco Nut
1ea ∅4"*H2mm
PARTS & ASSEMBLY SHEET
Fixture Name: Sancerre 1425-2W WG
This fixture assembled PO:__________ Date: ________
Mounting Strap
Iron Tube
crystal bobeche
Hex Nut
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If any parts are
missing or damaged, please note onthis sheet and contact the place of purchase to arrange for replacement
parts.
For Customer Service, contact the place of purchase to arrange for replacement parts.
F
IXTURE
A
SSEMBLY
I
NSTRUCTIONS
Read and review installation instruction sheet, but do not
install before assembling the fixture.
1425-2W WG
ASSEMBLING THE FIXTURE (Fig.1)
1. Crystal Chains (T) are individually wrapped and must be hung
piece by piece. Remove Crystal Chain (T) from the packaging and
examine the chain for Connection Pin (U). Drape Crystal Chain (T)
over Arm (S) so that Connection Pin (U) sits on top of Arm (S). This
will ensure proper draping length.
2. Attach Crystal Bobeche (Q) by sliding it over the socket. Then,
slide Candle Sleeve (P) into the hole and straighten.
Note: Please do not attempt to slide Crystal Bobeche (Q) over the
chrome Candle Sleeve (P) as it will scratch and damage the finish of
the candle sleeve.
Fig 1
NOTE: I
NSTALL THE GLASS ASSEMBLY AFTER THE
FIXTURE IS HUNG.