Golden Lighting 7509-M1L PW User Manual

Parts & assembly sheet, Parts list

Advertising
background image

1ea ∅5-1/2"*H1"

2ea 8#32-IP*1"

3ea P3 Orange

2ea 5/32-IP*1-3/5"

2ea 5/32-IP*H3mm

3ea ∅11.7*H12"

1ea ∅11.7*H6"

1ea G9*40W

2ea 5/32-IP*H10mm

Part Needed

Quantity

Part Needed

Quantity

Reason why

( missing, scratched, broken glass, bent, bad finish)

Comments

For Customer Service, contact the place of purchase to arrange for replacement parts.

PARTS LIST

Fig 1

Read and review installation instruction sheet before assembling the

fixture.

7509-M1L PW

1. By measuring, determine the correct number of rods needed for proper

hanging height.

* This fixture includes 4 rods (6", 12", 12", 12")

2. To shorten the fixture; slide the excess rods off the wires. To lengthen

add additional rods. The 12" rods are optional.

3. Pull the fixture’s wires through Rods (G) until taut and thread the rods

together. Then thread rods to the Fixture Coupler (H) at top of fixture and the

swivel joint on Canopy (F)

4.Pour Crystals (Y) into the groove of Glass Shades (O) then place Glass

Shades (O) over the threaded Sockets (P),secure Glass Shades (O) by

threading on

Socket Rings (N) until tight.

5. Install the light bulb in accordance with the fixture's specification.

Bulb note: Use a tissue or paper towel to hold the bulb and push down into

the socket. Oils or dirt can cause the bulb life to shorten. Rubbing alcohol is

recommended to clean the bulbs if dirty.

(DO NOT EXCEED THE MAXIMUM WATTAGE RATING!)

NOTE: INSTALL THE GLASS ASSEMBLY AFTER THE FIXTURE IS HUNG.

Rod

Bulb

Deco sut

Canopy

Mounting screws

Mounting strap

FIXTURE ASSEMBLY INSTRUCTIONS

1ea ∅4"*H2mm

Wire connectors

Mounting screws

Hex sut

PARTS & ASSEMBLY SHEET

Fixture Name: Asteria 7509-M1L PW

This fixture assembled PO:__________ Date: ________

Notice:

Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or

damaged, please note onthis sheet and contact the place of purchase to arrange for replacement parts.

Company Name:_______________________Co. Account #:_____________
to be filled out by retailer

Advertising
Table of contents