Golden Lighting 8201-1W BLK/SLV - Manual

Circular Mounting
Strap
Mounting Screw
Mounting
Screw
1ea Φ4"*H1.2mm 2ea 8/32-IP*1" 2ea 5/32-IP*1-1/2"
Hex Nut Wire Connector Deco Nuts
2ea 5/32-IP*H3mm 3ea A3 Orange 2ea 5/32-IP*H9mm
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
Read and review installation instruction sheet before
assembling the fixture.
8201-1W PW
PARTS & ASSEMBLY SHEET
Fixture Name: Tetiva 8201-1W BLK/SLV
This fixture assembled PO:__________ Date: ________
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts.
1. Slide the Metal Candle Sleeve (L) over Socket (M) and
put the Shade (N) on the sleeve.
*Shade will be secured by the light bulb.
2. Install the light bulb in accordance with the fixture's
specification.
3. Hang the crystals
(DO
NOT EXCEED THE MAXIMUM WATTAGE RATING!)
NOTE: I NSTALL THE GLASS ASSEMBLY AFTER
THE FIXTURE IS HUNG.
For Customer Service, contact the place of purchase to arrange for replacement parts.
PARTS LIST
Fig 1
Crystal Draping Ax4pcs
Company Name:_______________________Co. Account #:_____________
below to be filled out by retailer
F IXTURE A SSEMBLY I NSTRUCTIONS