Heli-Max HMXE0810 - Manual (Page 10)

10
INSTALL THE BATTERY
❏ 1. Remove the canopy by
sliding the canopy grommets
off of the carbon rods.
❏ 2. Slide the battery into
the front of the battery tray
as shown. Use three rubber
bands to hold the battery into
the tray.
INSTALL MAIN ROTOR BLADES
❏ Please make note of
the 2mm nut used on the
bottom of each blade grip.
When removing the blade
bolt, press upward on the
nut to ensure it remains in
the grip. Remove the blade
grip bolts using the 1.5mm
hex wrench.