Heli-Max HMXE0810 - Manual (Page 18)

18
TRACKING THE MAIN BLADES
At zero pitch, bring the
main rotor up to speed
and observe whether the
rotational planes of the
blades are the same. If they
are not, adjust one of the
linkages to bring the blades
into the same plane.
Apply the two different
colored stripe decals to
the tips of your main rotor
blades. These decals help
identify which blade is out
of track.
The training gear is a big help
to beginners. They soften
not so perfect landings and
help to prevent the helicopter
from tipping over. Even if
you have experience fl ying
a helicopter, please consider
using the supplied training
gear for the fi rst few fl ights.