Heli-Max HMXE0250 - Manual (Page 4)

4
Remember: Take your time and follow the instructions
to build a safe and enjoyable model.
This is a partial list of items required to finish the Kinetic .50
that may require planning or decision making before starting
to build. Order numbers are provided in parentheses.
The Kinetic .50 requires five servos. The cyclics, throttle and
collective require a minimum of 42 oz/in for basic aerobatics.
A Hi-Speed and Hi-Torque tail servo such as the (FUTM0224)
Futaba
® DS9254 is highly recommended to obtain the best
performance from the gyro.
A 6-channel transmitter is required to fly the Kinetic .50.
Modern computer radios make adjustments considerably
easier and are highly recommended. Plus the features on
the radios today make 3D maneuvers possible.
Transmitter/Receiver Recommendations:
• Budget: Futaba 6EXH FM w/4 S3151 Servo (FUTK58**)
• Mid-Range: Futaba 7CHF FM w/4 S3151 Servos (FUTJ73**)
• High-End: Futaba 9CHPS PCM Synthesized (FUTK9205)
Recommended Cyclic, Throttle and Collective Servos:
• Budget: Futaba S3001 (FUTM0029)
• Mid-Range: Futaba Digital S3151 (FUTM0310)
• High-End: Futaba Digital S9252 (FUTM0222)
Recommended Gyro and Tail Servo:
• Budget: Futaba GY240 (FUTM0809) and
S3151 Servo (FUTM0310)
• Mid-Range: Futaba GY401 w/S9254 Servo (FUTM0808)
• High-End: Futaba GY611 w/S9256 Servo (FUTM0825)
Recommended Receiver Batteries:
A 4-cell, 4.8 volt (2000mAh minimum) NIMH/NICAD battery
pack is recommended for the Kinetic .50
• Hydrimax
™ 4.8volt 2000mah Flat Battery (HCAM6321)
• Hydrimax 4.8volt 3600mah Flat Battery (HCAM6333)
• Hydrimax 4.8volt 4200mah Flat Battery (HCAM6335)
REQUIRED HARDWARE AND ACCESSORIES
This is the list of hardware and accessories required to finish
the Kinetic .50. Order numbers are provided in parentheses.
❏
O.S. ® 50 SX-H Ringed Hyper (OSMG1951)
❏
Torpedo Muffler .46-.50 (CEHG3033)
❏
Great Planes ® Pro Thread Locker (GPMR6060)
❏
Great Planes 1" x 3' Double Sided Tape (GPMQ4442)
❏
Great Planes 3' Silicone Fuel Tubing (GPMR4131)
❏
Great Planes Fuel Filter (GPMQ4150)
❏
O.S. Remote Glow Plug Adapter (OSMG2401)
❏
Heli-Max .30 – .50 Size Blade Holder (GPMQ4150)
FIELD EQUIPMENT
❏
Heli-Max One-Way Start Shaft (HMXP2050)
❏
Hobbico ® Glow Plug Wrench (HCAP2550)
❏
Hobbico Ultra-Tote ™ Field Box Complete Combo
(HCAP5105) (Includes the following items):
• Filling Station Can Fittings Set (GPMP4155)
• 12V Charger Torqmaster
™ Battery (HCAP0200)
• Deluxe Power Panel II (HCAP0302)
• Torqmaster 12V 7A Battery (HCAP0800)
• 5' Recoil Fuel Tubing (HCAP2200)
• Panel-Ready Locking Glow Plug Clip (HCAP2502)
• Panel-Ready Top Fueler
™ 6/12 Volt (HCAP3107)
• Torqmaster 90 12V Starter (HCAP3200)
• Ultra-Tote Field Box (HCAP5020)
OPTIONAL SUPPLIES AND TOOLS
❏
O.S. Crankshaft Clamp .32-.46 (OSMR1004)
❏
DuraTrax ® Phillips Screwdriver (DTXR0181)
❏
DuraTrax Slotted Screwdriver (DTXR0177)
❏
Hobbico Needle Nose Pliers (HCAR0625)
❏
Hobbico Curved Scissors (HCAR0667)
❏
Heli-Max Ball Link Pliers (HMXR4858)
❏
Heli-Max Pitch Gauge (HMXR4850)
❏
Heli-Max Blade Balancer (HMXR4855)
❏
DuraTrax 5.5mm Nut Driver (DTXR0212)
ADDITIONAL ITEMS REQUIRED
DECISIONS YOU MUST MAKE
We, as the manufacturer, provide you with a
top quality, thoroughly tested ARF and instructions,
but ultimately the quality and flyability of your finished
model depends on how you build it; therefore, we
cannot in any way guarantee the performance of your
completed model, and no representations are
expressed or implied as to the performance or safety
of your completed model.