Cruise control – HONDA 2003 S2000 - Owner's Manual User Manual

Page 120

Advertising
background image

Even with the cruise control turned
on, you can still use the accelerator
pedal to speed up for passing. After
completing the pass, take your foot
off the accelerator pedal. The car
will return to the set cruising speed.

Resting your foot on the brake or
clutch pedal will cause the cruise
control to cancel.

You can cancel the cruise control in
any of these ways:

The system remembers the
previously-set cruising speed. To
return to that speed, accelerate to
above 25 mph (40 km/h), then press

the RESUME/accel button. The
CRUISE CONTROL light comes on,
and the car will accelerate to the
same cruising speed as before.

Pressing the Cruise Control Master
Switch turns the system completely
off and erases the previous cruising
speed from memory. To use the
system again, refer to

.

Press the Cruise Control Master
Switch.

Press the SET/decel and
RESUME/accel buttons at the
same time.

Tap the brake or clutch pedal.

When you tap the brake or clutch
pedal, or press the SET and
RESUME buttons at the same time,
the CRUISE CONTROL light on the
instrument panel will go out and the
car will begin to slow down. You can
use the accelerator pedal in the
normal way.

Cancelling the Cruise Control

Using the

Cruise Control

Comf ort and Convenience Features

Cruise Control

117

Main Menu

Table of Contents

Advertising