HONDA 2003 S2000 - Owner's Manual - Manual (Page 207)

Insert a flat-tipped screwdriver
between the left edge of the lens
and the housing. The lens will
come down.
Put the lens back into the light
assembly, right side first. Push on
the left edge until it snaps into
place.
Test the lights to make sure the
new bulb is working.
Pull the bulb straight out of its
socket. Push the new bulb in until
it bottoms in the socket. 1. 2.
3.
4.
Lights
Maintenance
Replacing a Rear License Plate
Bulb
204
Main Menu Table of Contents