Indicator lights – HONDA 2003 S2000 - Owner's Manual User Manual

Page 51

Advertising
background image

The left or right turn signal light
blinks when you signal a lane change
or turn. If the light does not blink or
blinks rapidly, it usually means one
of the turn signal bulbs is burned out
(see page

). Replace the bulb as

soon as possible, since other drivers
cannot see that you are signaling.

This light comes on with the high
beam headlights. See page

for

information on the headlight
controls.

This indicator lights when you turn
the ignition switch to ON (II) with
the headlight switch off and the
parking brake set. It should go off if
you turn on the headlights or release
the parking brake. If it comes on at
any other time, it means there is a
problem with the DRL. There may
also be a problem with the high
beam headlights.

This indicator comes on for a few
seconds when you turn the ignition
switch ON (II). It will then go off if
you have inserted a properly-coded
ignition key. If it is not a properly-
coded key, the indicator will blink
and the engine will not start (see
page

).

When you turn on the Hazard
Warning switch, both turn signal
lights blink. All turn signals on the
outside of the car should flash.

This indicator also blinks several
times when you turn the ignition
switch from ON (II) to ACCESSORY
(I) or LOCK (0).

This light comes on as a reminder
that you must refuel soon.

This lights when you set the cruise
control. See page

for information

on operating the cruise control.

200

53

59

115

Canadian models only

Indicator Lights

Instruments and Controls

Turn Signal and
Hazard Warning
Indicators

High Beam Indicator

‘‘Daytime Running
Lights’’ Indicator

Immobilizer System
Indicator

Low Fuel Indicator

Cruise Control Indicator

48

Main Menu

Table of Contents

Advertising