HONDA 2003 S2000 - Owner's Manual - Manual (Page 223)

Unscrew the wing bolt and take
the spare tire out of the spare tire
shelf. Remove the three clips holding
the spare tire cover by pulling
straight up on the rings. Remove
the spare tire cover.
Loosen the five wheel nuts 1/2
turn with the wheel wrench.
Locate the jacking point nearest
the tire you need to change. It is
pointed to by an arrow molded into
the underside of the body. Place
the jack under the jacking point.
Turn the end bracket clockwise
until the top of the jack contacts
the jacking point. Make sure the
jacking point tab is resting in the
jack notch. 4. 5.
6.
7.
Changing a Flat Tire
Taking Care of the Unexpected 220
SPARE TIRE COVER
Main Menu Table of Contents