HONDA 2003 S2000 - Owner's Manual - Manual (Page 203)

If you are changing the bulb on
the driver’s side, start the engine,
turn the steering wheel all the way
to the right, and turn off the
engine. If you are changing the
bulb on the passenger’s side, turn
the steering wheel to the left.
Pull the inner fender cover back.
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Pull the bulb straight out of its
socket.
Install the new bulb in the socket.
Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Test the lights to make sure the
new bulb is working.
Use a flat-tipped screwdriver to
remove the three holding clips
from the inner fender.
Put the inner fender cover in place.
Install the three holding clips.
Lock each clip in place by pushing
on the center.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Lights
Maintenance
Replacing Front Turn Signal and
Side Marker Light Bulbs
200
Main Menu Table of Contents