Cooling system – HONDA 2003 S2000 - Owner's Manual User Manual

Page 169

Advertising
background image

The coolant level should be up to
the base of the filler neck. Add
coolant if it is low.

Turn the radiator cap counter-
clockwise, without pressing down
on it, until it stops. This relieves
any pressure remaining in the
cooling system.

Remove the radiator cap by
pushing down and turning
counterclockwise.

Pour coolant into the reserve tank.
Fill it to halfway between the MAX
and MIN marks. Put the cap back
on the reserve tank.

Put the radiator cap back on.
Tighten it fully.

Pour the coolant slowly and
carefully so you do not spill. Clean
up any spills immediately. Spilled
coolant could damage components
in the engine compartment.

Do not add any rust inhibitors or
other additives to your car’s cooling
system. They may not be compatible
with the coolant or engine compo-
nents.

2.

3.

4.

5.

6.

Cooling System

Maintenance

166

RADIATOR CAP

RESERVE TANK

Fill up to here

FILLER NECK

Main Menu

Table of Contents

Advertising