Engine oil – HONDA 2003 S2000 - Owner's Manual User Manual
Page 164
To add oil, unscrew and remove the
engine oil fill cap on top of the left
valve cover. Pour in the oil, and
replace the engine oil fill cap.
Tighten it securely. Wait a few
minutes and recheck the oil level. Do
not fill above the upper mark; you
could damage the engine.
Make sure the API Certification Seal
says ‘‘For Gasoline Engines.’’
Pour the oil slowly and carefully so
you do not spill. Clean up any spills
immediately. Spilled oil could
damage components in the engine
compartment.
Oil is major contributor to your
engine’s performance and longevity.
Always use a premium-grade
detergent oil displaying the API
Certification Seal. This seal indicates
the oil is energy conserving, and that
it meets the American Petroleum
Institute’s latest requirements. It is
highly recommended that you use
Honda Motor Oil in your vehicle for
as long as you own it.
CONTINUED
Adding Oil
Recommended Oil
Engine Oil
Maintenance
161
API CERTIFICATION SEAL
Main Menu
Table of Contents