Indicator lights – HONDA 2003 S2000 - Owner's Manual User Manual
Page 49
This light has two functions:
If this light comes on when the
engine is running, the battery is not
being charged. For complete
information, see page
.
The engine can be severely damaged
if this light flashes or stays on when
the engine is running. For complete
information, see page
.
The instrument panel has many
indicators to give you important
information about your car.
If you do not fasten your seat belt,
the beeper will stop after a few
seconds but the light stays on until
you do. Both the light and the beeper
stay off if you fasten your seat belt
before turning on the ignition.
This indicator flashes for several
seconds when you turn the ignition
ON (II). It flashes as a reminder to
you and your passenger to fasten the
seat belts. A beeper also sounds if
you have not fastened your seat belt.
This indicator comes on when you
turn the ignition switch ON (II). It
is a reminder to check the parking
brake. Driving with the parking
brake not fully released can
damage the brakes and tires.
If the indicator remains lit after
you have fully released the
parking brake while the engine is
running, or if it comes on while
driving, it can indicate a problem
in the brake system. For complete
information, see page
.
2.
1.
Parking Brake and
Brake System Indicator
Low Oil Pressure
Indicator
Charging System
Indicator
Seat Belt Reminder Light
Instruments and Controls
Indicator Lights
46
U.S.
Canada
Main Menu
Table of Contents