HONDA 2000 Insight - Owner's Manual - Manual (Page 193)

Lights
Replacing a Headlight Bulb
Your car has halogen headlight
bulbs, one on each side. When
replacing a bulb, handle it by its steel
base and protect the glass from
contact with your skin or hard
objects. If you touch the glass, clean
it with denatured alcohol and a clean
cloth.
Halogen headlight bulbs get very hot
when lit. Oil, perspiration, or a scratch
on the glass can cause the bulb to
overheat and shatter.
HOLDER
1. Open the hood.
If you need to change the head-
light bulb on the driver's side,
remove the engine coolant
reservoir tank by pulling it out of
its holder.
WEATHER SEAL
CONNECTOR HOLD-DOWN WIRE
2. Remove the electrical connector
from the bulb by squeezing the
connector on both sides to unlock
the tab. Pull the connector straight
off.
3. Remove the rubber weather seal
by pulling on the tab.
Maintenance
BULB
NOTICE
Main Menu Table of Contents