HONDA 2000 Insight - Owner's Manual - Manual (Page 195)

Lights
2. Use a Phillips-head screwdriver to
remove the screw from the top of
the fender.
3. Pull the inner fender cover back.
4. Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
5. Remove the burned out bulb from
the socket by pushing it in and
turning counterclockwise until it
unlocks.
6. Install the new bulb in the socket.
Turn it clockwise to lock it in place.
7. Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
8. Test the lights to make sure the
new bulb is working.
9. Put the inner fender cover in place.
Tighten the screw securely.
Maintenance
Main Menu Table of Contents