HONDA 2000 Insight - Owner's Manual - Manual (Page 93)

Climate Control System
Fully-automatic Operation
Auto Button
To put the Automatic Climate
Control in fully-automatic mode,
press the AUTO button and set the
desired temperature by turning the
temperature control dial. You will
see AUTO in the system's display.
The light above the button
also shows you which mode,
Recirculation or Fresh Air, is
selected.
When the system is in fully
automatic mode, the auto idle stop
function will not be activated.
The system automatically selects the
proper mix of conditioned and/or
heated air that will, as quickly as
possible, raise or lower the interior
temperature from its current level to
the set temperature.
FAN SPEED BUTTON TEMPERATURE
CONTROL DIAL
MODE BUTTON
OFF BUTTON
When you set the temperature to its
lower limit (60°F/18°C) or its upper
limit (90°F/32°C), the system runs
at full cooling or heating only. It does
not regulate the interior temperature.
When the temperature is set
between the lower and upper limits,
the system regulates the interior
temperature to the set value.
In cold weather, the fan will not
come on automatically until the car
has been driven for a short time and
the heater starts to develop warm air.
Comfort and Convenience Features
AUTO BUTTON
ECON BUTTON
Main Menu Table of Contents