HONDA 2000 Insight - Owner's Manual - Manual (Page 211)

Changing a Flat Tire
1. Rear tire only:
Use a flat-tipped screwdriver to
loosen the two stud fasteners
holding the rear wheel skirt.
2. Pull the rear wheel skirt
downward.
Do not catch your clothes or
hands on the hooks on the rear
fender when you replace the
wheel.
CENTER CAP
3. Remove the center cap from the
wheel with the end of the
extension or a flat-tipped
screwdriver.
4. Loosen the four wheel nuts 1/2
turn with the wheel wrench.
Taking Care of the Unexpected
REAR WHEEL SKIRT
STUD
FASTENER
Main Menu Table of Contents