HONDA 2000 Insight - Owner's Manual - Manual (Page 56)

Gauges
Lifetime Fuel Mileage
When the odometer is displayed, the
Fuel Mileage display shows the
lifetime fuel mileage. This is the
average fuel mileage your vehicle
has gotten since the last time the
display was reset.
To reset this display, turn the
ignition switch to ON (II). If the
engine is running, make sure the
transmission is in neutral and the
parking brake is set. Use the Trip
button to display the odometer. Then
press and hold the Trip button until
the Lifetime Fuel Mileage Display
begins to blink (approximately five
seconds). Release the Trip button,
then press it again while the display
is blinking and hold it until the
display clears to dashes.
Turning Off the Mileage Displays
You can temporarily turn off the
Current Fuel Mileage and Fuel
Mileage displays.
To turn them off:
1. Turn the ignition switch to ON (II).
If the engine is running, make
sure the transmission is in neutral
and the parking brake is set.
2. Use the Trip button to select Trip
A, Trip B, or the odometer.
3. Press and hold the FCD Select
button for approximately three
seconds. The Current Fuel
Mileage display will turn off.
4. Press and hold the FCD Select
button again. The Fuel Mileage
display for the meter you are
displaying (Trip A, Trip B, or
odometer) will turn off.
Instruments and Controls
CONTINUED
Main Menu Table of Contents