HONDA 2000 Insight - Owner's Manual - Manual (Page 214)

Changing a Flat Tire
11.Tighten the wheel nuts securely in
the same crisscross pattern. Have
the wheel nut torque checked at
the nearest automotive service
facility.
Tighten the wheel nuts to:
80 lbf.ft (108N.m, 11 kgf.m)
Do not catch your clothes or
hands on the hooks on the rear
fender when you replace the
wheel.
12.To install the rear wheel skirt,
place the skirt against the body.
Line up the slots on the skirt with
the tabs in the body, then push the
skirt upward.
Make sure the wheel skirt is
installed correctly.
13.Tighten the two stud fasteners.
Align the marks on the stud
fastener with the marks on the
wheel skirt.
It is not recommended to drive your car-
without the wheel skirts.
It will affect the fuel consumption.
CONTINUED
Taking Care of the Unexpected
TAB
SLOT
Main Menu Table of Contents