HONDA 2000 Insight - Owner's Manual - Manual (Page 198)

Lights
Replacing an Interior Light Bulb
1. Remove the lens by carefully
prying on the edge of the lens in
the middle with a fingernail file or
a small flat-tip screwdriver. Do not
pry on the edge of the housing
around the lens.
2. Remove the bulb by pulling it
straight out of its metal tabs.
3. Push the new bulb into the metal
tabs. Snap the lens back in place.
Replacing the Cargo Area Light
1. Remove the lens by carefully
prying on the edge of the lens in
the middle with a fingernail file or
a small flat-tip screwdriver. Do not
pry on the edge of the housing
around the lens.
Maintenance
INTERIOR LIGHT
Main Menu Table of Contents