Indicator lights – HONDA 2000 Insight - Owner's Manual User Manual
Page 49
Indicator Lights
Seat Belt Reminder Light
This indicator lights when you turn
the ignition switch ON (II). It is a
reminder to you and your passengers
to protect yourselves by fastening
the seat belts. A beeper also sounds
if you have not fastened your seat
belt.
If you do not fasten your seat belt,
the beeper will stop after a few
seconds but the light stays on until
you do. Both the light and the beeper
stay off if you fasten your seat belt
before turning on the ignition.
Charging System
Indicator
If this light comes on when the
engine is running, the battery is not
being charged. For complete
.
Low Oil Pressure
Indicator
The engine can be severely damaged
if this light flashes or stays on when
the engine is running. For complete
.
Supplemental Restraint
System Indicator
This indicator lights when you turn
the ignition switch ON (II). If it
comes on at any other time, it
indicates a problem in the
supplemental restraint system. For
complete information, see page
.
Shift Up/Shift Down Indicators
See page
.
Auto Idle Stop Indicator
See page
.
IMA System Indicator
This indicator normally comes on for
a few seconds when you turn the
ignition switch ON (II). If it comes
on at any other time, it indicates a
problem in the Integrated Motor
Assist (IMA) system. Have the
vehicle checked by the dealer as
soon as possible.
U.S.
Parking Brake
and Brake
System
Indicator
This light has two functions:
1. It lights as a reminder that you
have not released the parking
brake. Driving with the parking
brake applied can damage the
brakes and tires.
2. If it remains lit after you release
the parking brake, or comes on
while driving, it can indicate a
problem in the brake system. For
complete information, see page
.
Instruments and Controls
Canada
SRS
BRAKE
Main Menu
Table of Contents