Exterior care – HONDA 2000 Insight - Owner's Manual User Manual

Page 202

Advertising
background image

Exterior Care

Although almost all exterior panels on

your Honda are made of hardened

aluminum, they may dent more easily

than steel under some conditions.

Exercise care when leaning on or over

any part of the body.

Washing

Frequent washing helps preserve

your car's beauty. Dirt and grit can

scratch the paint, while tree sap and

bird droppings can permanently ruin

the finish.

Wash your car in a shady area, not in

direct sunlight. If the car is parked in

the sun, move it into the shade and

let the exterior cool down before you

start.

Only use the solvents and cleaners

recommended in this Owner's

Manual.

Chemical solvents and strong cleaners

can damage the paint, metal, and

plastic on your car.

Rinse the car thoroughly with cool

water to remove loose dirt.

Fill a bucket with cool water. Mix

in a mild detergent, such as

dishwashing liquid or a product

made especially for car washing.

Wash the car using the water and

detergent solution and a soft-

bristle brush, sponge, or soft cloth.

Start at the top and work your way

down. Rinse frequently.

Check the body for road tar, tree

sap, etc. Remove these stains with

tar remover or turpentine. Rinse it

off immediately so it does not

harm the finish. Remember to re-

wax these areas, even if the rest of

the car does not need waxing.

When you have washed and rinsed

the whole exterior, dry it with a

chamois or soft towel. Letting it

air-dry will cause dulling and water

spots.

As you dry the car, inspect it for

chips and scratches that could allow

corrosion to start. Repair them with

touch-up paint (see page

200

).

Appearance Care

NOTICE

NOTICE

Main Menu

Table of Contents

Advertising