IC Realtime Combo Series: 8 Channel DVR with built-in 10 LCD monitor User Manual
Page 35
26
Figure 4-7
Please refer to the following sheet for detailed information.
1
Go to the main menu.
8
Search
2
Hide navigation bar.
9
Alarm output
3
One-window preview
channel
10
Record control
4
Four-window preview
channel
11
Volume
5
Eight-window preview
channel
12
Color
6
Nine-window preview
channel
13
Network
7
PTZ setup
14
HDD management
4.2.2 Manual record
Note:
You need to have proper rights to implement the following operations. Please make sure the
HDD has been properly installed.
4.2.2.1 Manual record menu
There are two ways for you to go to manual record menu.
z
Right click mouse or in the main menu, Advanced->Manual Record.
z
In live viewing mode, click record button in the front panel or REC button in the remote
control.
Manual record menu is shown as in
X295H295H295H
Figure 4-5
X
.
4.2.2.2 Basic operation
There are three statuses: schedule/manual/stop. Please highlight icon“○” to select
corresponding channel.
z
Manual: The highest priority. After manual setup, all selected channels will begin ordinary
recording.
z
Schedule: Channel records as you have set in recording setup (Main Menu->Setting-
>Schedule)
z
Stop: All channels stop recording.
Figure 4-8