IC Realtime Combo Series: 8 Channel DVR with built-in 10 LCD monitor - Manual (Page 71)

62
Figure 5-24
In Figure 5-24, click modify button after channel. You can see an interface is shown as in Figure
5-25. Please note all your modification here applies to local end only. You need to refresh web or
client-end to get the latest channel name. System max support 25-digital character.
Figure 5-25
In tour mode, you can see the following interface. On the right corner, right click mouse or click
shift button, you can control the tour. There are two icons: stands for enabling window switch
and stands for enabling window function. See Figure 5-26.
Figure 5-26
Screen Calibration
Please note this function is for touch panel series product only.