IC Realtime Combo Series: 8 Channel DVR with built-in 10 LCD monitor User Manual
Page 47
38
z
Record channel: you can select proper channel to record alarm video (Multiple choices). At
the same time you need to set alarm record in schedule interface (Main Menu->Setting-
>Schedule) and select schedule record in manual record interface (Main Menu->Advance-
>Manual Record).
z
Latch: Here is for you to set proper delay duration. Value ranges from 10 to 300 seconds.
System automatically delays specified seconds in turning off alarm and activated output after
external alarm cancelled.
z
Tour: Here you can enable tour function when an alarm occurs. It is a one-window tour:
Please go to chapter 5.3.9 Display for tour interval setup.
z
Buzzer: Highlight icon to enable this function. The buzzer beeps when an alarm occurs.
For snapshot operation, please refer to chapter 4.4.2.
Please highlight icon
to select the corresponding function. After setting all the setups
please click save button, system goes back to the previous menu.
Figure 4-25
Figure 4-26