IC Realtime H.264E Hybrid DVRs 4/8/16-CH Analog + 4/8/16-CH IP - Manual (Page 122)

112
Figure 7-32
Please refer to the following sheet for detailed information.
Parameter Function
Ethernet Please select the network card first.
DHCP Dynamically get IP address. You can get the device IP from
the DHCP server if you enabled this function.
TCP Port Default value is 37777.
HTTP Port Default value is 80.
UDP Port Default value is 37778.
RTSP Port Default value is 554.
Max Connection Network user max amount. The value ranges from 0 to 20.
O means there is no user can access current device.
Multiple
cast
group — Set MULCAST address and port.
—
Enable MULCAST function.
Remote
Host
PPPOE
—
Input the PPPoE user name and password you get from the
IPS (internet service provider) and enable PPPoE function.
Please save current setup and then reboot the device to get
the setup activated.
—
Device connects to the internet via PPPoE after reboot. You
can get the IP address in the WAN from the IP address