IC Realtime H.264E Hybrid DVRs 4/8/16-CH Analog + 4/8/16-CH IP - Manual (Page 61)

51
Figure 4-44
4.9.8 Activate Auto Scan
In Figure 4-40, click “Auto Scan” button, the system begins auto scan. Correspondingly,
the auto scan button becomes Stop button. Click stop button to terminate scan operation.
4.10 Flip
In Figure 4-40, click page switch button, you can see an interface is shown as below. See
Figure 4-45. Here you can set auxiliary function. The aux value has relation ship with the
Aux button of the decoder.
Click page switch button again, system goes back to Figure 4-36.
Figure 4-45