IC Realtime H.264E Hybrid DVRs 4/8/16-CH Analog + 4/8/16-CH IP - Manual (Page 83)

73
and then reboot.
Figure 5-33
Channels Setting
Click the button named with “Channels Settings” at the top right corner of the Figure 5-30,
system will pop up an interface shown as in Figure 5-34.
When you are setting the configurations of the channels setting, please select relevant
channels first (such as channel 1 to 16), and then select the HDD Group NO. Please click
the Save button to save current setup.
The Figure 5-34 and Figure 5-35 show that channels 1 to 16 are associated to HDD
Group NO 1, and channels 17 to 32 are associated to HDD Group NO 2. Therefore the
records of channels 1 to 16 are stored into the hard disk(s) which belong to HDD Group
NO 1, and the records of channels 17 to 32 are stored into the hard disk(s) which belong
to HDD Group NO 2.
Important
Once you change the HDD Group settings, system will pack the records and snapshots,
and then reboot.
Figure 5-34