IC Realtime H.264E Hybrid DVRs 4/8/16-CH Analog + 4/8/16-CH IP - Manual (Page 39)

29
4.2.2.3 Enable/disable record
Please check current channel status: “○” means it is not in recording status, “●” means
it is in recording status.
You can use mouse or direction key to highlight channel number. See Figure 4-8.
Figure 4-8
4.2.2.4 Enable all channel recording
Highlight ○ below All, you can enable all channel recording.
z
All channel schedule record
Please highlight “ALL” after “Schedule”. See Figure 4-9.
When system is in schedule recording, all channels will record as you have previously
set (Main menu->Setting->Schedule).
The corresponding indication light in front panel will turn on.
Figure 4-9
z All channel manual record
Please highlight “ALL” after “Manual.” See Figure 4-10.
When system is in manual recording, all scheduled set up you have set in will be null
((Main menu->Setting->Schedule)).
You can see indication light in front panel turns on, system begins manual record now.
Figure 4-10