IC Realtime H.264E Hybrid DVRs 4/8/16-CH Analog + 4/8/16-CH IP - Manual (Page 44)

34
z Record types: There are four types: regular, motion detection (MD), Alarm, MD &
alarm.
Please highlight icon to select the corresponding function. After completing all the
setups please click save button, system goes back to the previous menu.
At the bottom of the menu, there are color bars for your reference. Green color stands
for regular recording, yellow color stands for motion detection and red color stands for
alarm recording. The white means the MD and alarm record is valid. Once you have
set to record when the MD and alarm occurs, system will not record neither motion
detect occurs nor the alarm occurs.
Figure 4-13
4.4.1.1 Quick Setup
This function allows you to copy one channel setup to another. After setting in channel 1,
you can click paste button and turn to channel 2 and then click copy button. You can finish
setting for one channel and then click save button or you can finish all setup and then click
save button to memorize all the settings.
4.4.1.2 Redundancy
Redundancy function allows you to memorize record file in several disks. When there
is file damage occurred in one disk, there is a spare one in the other disk. You can use
this function to maintain data reliability and safety.
In the main menu, from Setting to Schedule, you can highlight redundancy button to
enable this function. See Figure 4-13.
In the main menu, from Advanced to HDD management, you can set one or more
disk(s) as redundant. You can select from the dropdown list. See Figure 4-14. System
auto overwrites old files once hard disk is full.
Please note only read/write disk or read-only disk can backup file and support file
search function, so you need to set at least one read-write disk otherwise you can not
record video.
Note
About redundancy setup: