Interlogix GE-DSH-73 Series User Manual - Manual (Page 135)

Chapter 5: Web-Based Management
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 131
Power Over Ethernet (GE-DSH-82-PoE)
Providing up to 8 PoE, in-line power interface, the GE-DSH-82-PoE Industrial PoE
Switch can easily build a power central-controlled IP phone system, IP Camera
system, AP group for the enterprise. For instance, 8 camera / AP can be easily
installed around the corner in the company for surveillance demands or build a
wireless roaming environment in the office. Without the power-socket limitation, the
PoE Switch makes the installation of cameras or WLAN AP more easily and efficiently.
NOTE: PoE functionality requires the use of the recommended a power source.
This product is intended to be supplied by a UL Listed Direct Plug-In Power Unit
marked "Class 2" or "LPS" and output rated 48 VDC, 380 mA minimum.
Power over Ethernet Powered Device
3~5 watts
Voice over IP phones
Enterprise can install POE VoIP Phone, ATA and other Ethernet/non-
Ethernet end-devices to the central where UPS is installed for un-interrupt
power system and power control system.
6~12 watts
Wireless LAN Access Points
Museum, Sightseeing, Airport, Hotel, Campus, Factory, Warehouse can
install the Access Point any where with no hesitation
10~12 watts
IP Surveillance
Enterprise, Museum, Campus, Hospital, Bank, can install IP Camera
without limits of install location – no need electrician to install AC sockets.
3~12 watts
PoE Splitter
PoE Splitter split the PoE 48V DC over the Ethernet cable into 5/9/12V DC
power output. It frees the device deployment from restrictions due to
power outlet locations, which eliminate the costs for additional AC wiring
and reduces the installation time.