Interlogix GE-DSH-73 Series User Manual User Manual
Page 43
Advertising
Chapter 4: Console Management
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
39
Figure 4-3: The COM1 properties window
2. Once the terminal has connected to the device, power on the GE-DSH series
Managed Industrial Switch, the terminal will display that it is running testing
procedures.
3. Then, the following message asks the login password. The factory default
password as following and the login screen in below figure appears.
User name: admin
Password: admin
Figure 4-4: The login screen
Advertising
This manual is related to the following products: